تسجيل الدخول إنشاء حساب جديد

liquid phase أمثلة على

"liquid phase" معنى  
أمثلةجوال إصدار
  • He did this by calculating Avogadro's number using three different methods, all involving liquid phase systems.
    قام بذلك من خلال حساب ثابت أفوجادرو بثلاث طرق مختلفة، كلها تتضمن طور سائل.
  • The standard enthalpy of formation is 100.2 kJ·mol−1 in the liquid phase and 140.4 kJ·mol−1 in the gas phase.
    الحرارة القياسية لتكوين البيريدين هي 100.2 كيلوجول.مول −1 في الطور السائل، في حين أنّها 140.4 كيلوجول.مول −1 في الطور الغازي.
  • Within the Earth's atmosphere and surface, the liquid phase is the most common and is the form that is generally denoted by the word "water".
    و الحالة السائلة هي الأكثر شيوعا بين مراحل الماء (داخل الغلاف الجوي للأرض والسطحية) وهو الشكل الذي يرمز له عادة بكلمة "الماء".
  • Antiphospholipid syndrome is tested for in the laboratory using both liquid phase coagulation assays (lupus anticoagulant) and solid phase ELISA assays (anti-cardiolipin antibodies).
    يتم اختبار متلازمة الدهون الفوسفورية في المختبر باستخدام كل من المرحلة السائلة للتحليل التخثر (مضاد تخثر الذئبة)، والمرحلة الصلبة (مقايسة الممتز المناعي المرتبط بالإنزيم) (الأجسام المضادة للكارديوليبين).
  • Dimers also occur in the liquid phase in dilute solutions in non-hydrogen-bonding solvents, and a certain extent in pure acetic acid, but are disrupted by hydrogen-bonding solvents.
    تحدث الأطياف أيضًا في الطور السائل في المحاليل المخففة في مذيبات غير هيدروجينية، وإلى حد ما في حمض الخليك النقي، ولكنها تتعطل بواسطة مذيبات رابطة الهيدروجين.
  • It is important that a sample is collected that is representative of both the gas and liquid phase fractions and that there is no mass transfer between the phases during sampling.
    ومن الأهمية بمكان أن يتم أخذ عينة ممثلة لكسر كل من مرحلة السائل والغاز وألا يكون هناك تغير كتلي بين المراحل أثناء أخذ العينة.
  • The amount of hydrocarbons present in the liquid phase of the wet gas extracted depends on the reservoir temperature and pressure conditions, which change over time as the gas and liquid are removed.
    وتعتمد كمية الهيدروكربونات الموجودة في المرحلة السائلة من الغاز الرطب المستخلص على درجة حرارة الصهريج وظروف الضغط، والتي تتغير على مدار الوقت بينما تتم إزالة الغاز والسائل.
  • The various phase transformations that occur during the solidification of a particular alloy composition can be understood by drawing a vertical line from the liquid phase to the solid phase on the phase diagram for that alloy.
    ويمكن فهم التحولات التي تحدث أثناء مرحلة ترسيخ خليط تعطى عن طريق رسم خط عمودي من المرحلة السائلة إلى المرحلة الصلبة في مرحلة الرسم.
  • Thus, the sol evolves toward the formation of a gel-like diphasic system containing both a liquid phase and solid phase whose morphologies range from discrete particles to continuous polymer networks.
    ومن ثم يرتقي المحلول نحو تكوين أنظمة شبيهة بالجيل أو الهلام مزدوجة المرحلة والتي تشتمل على كلٍ من المرحلة السائلة والمرحلة الصلبة واللتين يتراوح تشكيلهما من الجزيئات المتقطعة إلى شبكات البوليمر المستمرة.
  • Most of the meters use differential pressure for the gas phase and a form of liquid detection or wet gas density measurement for the liquid phase normally utilising one of the techniques listed above.
    وتستخدم معظم تلك العدادات الضغط التفاضلي لمرحلة الغاز وشكلاً من اكتشاف الغاز أو قياس كثافة الغاز الرطب لقياس مرحلة السائل ويتم ذلك في الطبيعي باستخدام إحدى التقنيات المذكورة عاليه.
  • Its early use was on germanium for this purpose, but it can be extended to virtually any solute-solvent system having an appreciable concentration difference between solid and liquid phases at equilibrium.
    استخدمت هذه العملية في البداية من أجل الحصول على عنصر الجرمانيوم عالي النقاوة، بعد ذلك أصبح بالإمكان تطبيق العملية على أي نظام محلول-مُحلّ لديه فرق معتبر في التركيز بين الطورين الصلب والسائل عند التوازن.
  • Relative volatilities are used in the design of all types of distillation processes as well as other separation or absorption processes that involve the contacting of vapor and liquid phases in a series of equilibrium stages.
    ويستخدم التطاير النسبي في تصميم جميع عمليات التقطير وكذلك في تصميم عمليات الفصل الأخرى مثل عمليات الامتصاص التي تعتمد على أطوار السائل والبخار حيث يجري ذلك في مراحل عديدة من حالات التوازن .
  • Advanced signal processing is used where a liquid phase has an effect on the measurement signal such as pressure fluctuations in a DP flow meter or shift in the speed of sound in ultrasonic flow meter.
    معالجة الإشارة المتقدمة تستخدم تلك الطريقة عندما يكون لمرحلة السائل تأثير على إشارة القياس مثلما يحدث عند تذبذبات الضغط في عداد تدفق الضغط التفاضلي أو التحول في سرعة الصوت عن عداد التدفق فوق الصوتي.